Modeling the effect of inoculum size and acid adaptation on growth/no growth interface of Escherichia coli O157:H7

The objective of this study was to model with logistic regression the growth/no growth interface of different initial inoculation levels (10¹, 10³ and 10⁵ CFU/ml; study 1), or nonadapted vs acid-adapted (study 2) Escherichia coli O157:H7 as influenced by pH, NaCl concentration and incubation temperature. Study 1 was conducted with a mixture of four E. coli O157:H7 strains grown (35 °C, 24 h) in tryptic soy broth (TSB). Study 2 was conducted with the same mixture of four E. coli O157:H7 strains grown (35 °C, 24 h) in glucose-free TSB with 1% added glucose (final pH 4.83), or in diluted lactic acid meat decontamination runoff fluids (washings; final pH 4.92), or nonadapted cultures prepared in glucose-free TSB (final pH 6.45), or in water washings (final pH 6.87). Parameters included incubation temperature (10–35 °C), pH (3.52–7.32), and NaCl concentration (0–10% w/v). Growth responses were evaluated for 60 days turbidimetrically (610 nm) every 5 days in 160 (study 1) and 360 (study 2) combinations in quadruplicate samples, with a microplate reader. The lower the initial inoculum the higher were the minimum pH and a_w values permitting growth. Differences in the pH and a_w growth limits among inoculum concentrations increased at 15 and 10 °C. Acid-adapted cultures were able to grow at lower pH than nonadapted cultures, while at temperatures below 25 °C, growth initiation of nonadapted cultures stopped at higher a_w compared to acid-adapted cultures for the whole pH range of 3.52 to 7.32. A comparison with available data indicated that our model for acid-adapted E. coli O157:H7 in different environments may provide representative growth probabilities covering both nonadapted and stress-adapted contaminants.