首页 | 本学科首页   官方微博 | 高级检索  
     

激光激发板状分层材料的超声波场模拟
引用本文:许伯强,李俊敏,徐桂东,张景秀.激光激发板状分层材料的超声波场模拟[J].电子科技,2014,27(11):38-41,55.
作者姓名:许伯强  李俊敏  徐桂东  张景秀
作者单位:(1.江苏大学 理学院,江苏 镇江 212013;2.江苏大学 机械工程学院,江苏 镇江 212013)
基金项目:国家自然科学基金资助项目,江苏省高校自然科学研究基金资助项目,江苏省六大人才高峰基金资助项目
摘    要:针对均匀层状材料受线分布等效载荷作用时波的产生和传播的模拟过程,提出了一种新的动态刚度矩阵构造方法。采用激光等效力源,分别对有边界和无边界两种情况下板材料的单元动态刚度矩阵的频率变化特性进行了研究,给出了该方法构造的刚度矩阵频率响应变化,并对位移响应的求解过程进行了建模仿真。

关 键 词:FFT  分层板材料  激光超声  

Simulation of Laser-generated Ultrasonic in Layered Planes by Spectral Element Method
XU Baiqiang , LI Junmin , XU Guidong , ZHANG Jingxiu.Simulation of Laser-generated Ultrasonic in Layered Planes by Spectral Element Method[J].Electronic Science and Technology,2014,27(11):38-41,55.
Authors:XU Baiqiang  LI Junmin  XU Guidong  ZHANG Jingxiu
Affiliation:(1.College of Science,Jiangsu University,Zhenjiang 212013,China; 2.School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China)
Abstract:This paper presents a novel derivation to construct dynamic stiffness matrix of wave generation and propagation in homogeneous medium forced by line distribution loading. The frequency response of element dynamic stiffness is studied in both non-boundaries and boundaries conditions. Dynamic stiffness of the spectral element layer and the throw-off element as a function of frequency parameter for the plane case are given. An element matrix similar to finite element is proposed,which is referred to as spectral finite element method. And the modeling is established according to the matrixes to obtain the displacement response.
Keywords:FFT  layered planes  laser-generated ultrasonic
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电子科技》浏览原始摘要信息
点击此处可从《电子科技》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号