首页 | 本学科首页   官方微博 | 高级检索  
     

聚糠醛吸附亚甲基蓝的研究
引用本文:宛 美,许 峰,马健岩,等.聚糠醛吸附亚甲基蓝的研究[J].当代化工,2014(4):506-508,511.
作者姓名:宛 美  许 峰  马健岩  
作者单位:沈阳建筑大学材料科学与工程学院,辽宁沈阳110168
摘    要:通过聚糠醛吸附亚甲基蓝水溶液,从两个方面研究了聚糠醛对亚甲基蓝的吸附性能的影响因素,一方面是在制备聚糠醛过程中加入不同的硫酸量,另一方面是聚糠醛在不同的温度下进行煅烧。通过记录的吸附数据建立亚甲基蓝吸附量Q与加入不同硫酸量样品随时间t的变化关系并绘制成图。通过分析,结果表明加入硫酸量为50 mL制备的聚糠醛吸附亚甲基蓝的性能较好;在300℃煅烧下,聚糠醛吸附亚甲基蓝的性能较好。

关 键 词:聚糠醛  亚甲基蓝  吸附

Research on Adsorption Performance of Poly Furfural for Methylene Blue
WAN Mei,XU Feng,MA Jian-yan,WANG Li-juan.Research on Adsorption Performance of Poly Furfural for Methylene Blue[J].Contemporary Chemical Industry,2014(4):506-508,511.
Authors:WAN Mei  XU Feng  MA Jian-yan  WANG Li-juan
Affiliation:( School of Materials Science and Engineering, Shenyang Jianzhu University, Liaoning Shenyang 110168, China)
Abstract:Factors affecting adsorption performance of poly furfural for methylene blue were studied from two aspects including sulfuric acid dosage in the preparation process of poly furfural and calcination temperature of poly furfural. By recording the adsorption data, change relationship between methylene blue adsorption quantity Q with adding sulfuric acid dosage over time was established. The analysis results show that,when sulfuric acid dosage is 50 mL and calcination temperature of poly furfural is at 300 ℃,adsorption performance of prepared poly furfural for methylene blue is the best.
Keywords:Poly furfural  Methylene blue  Adsorption
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号