| 氨纶生产线模拟仿真系统 |
| |
| 引用本文： | 孙令明,刘坤,张勇忠,王秋爽. 氨纶生产线模拟仿真系统[J]. 长春邮电学院学报, 2010, 0(6): 587-591 |
| |
| 作者姓名： | 孙令明 刘坤 张勇忠 王秋爽 |
| |
| 作者单位： | [1]吉林大学通信工程学院,长春130025 [2]吉林大学农学部公共教学中心,长春130062 [3]长春汽车工业高等专科学校电器工程系,长春130011 |
| |
| 基金项目： | 吉林省科技发展重大资金资助项目（20060304） |
| |
| 摘 要： | 由于氨纶生产工艺复杂,生产周期长,原材料价格昂贵,不可能也不允许在生产线上进行操作优化或工艺参数的寻优试验。为此,建立了氨纶生产线模拟仿真系统,并在该模拟仿真系统上进行操作优化、工艺参数的寻优、原料配方、工艺调整等各种试验,取得成功后,在生产线上运行。该模拟仿真系统为企业的操作人员培训、生产设备故障的快速诊断提供了良好的操作平台。
|
| 关 键 词： | 氨纶 聚合反应 仿真系统 约束条件 工艺参数 |
Establishment of Spandex Production-Line Simulation System |
| |
| SUN Ling-minga,LIU Kuna,ZHANG Yong-zhong,WANG Qiu-shuang. Establishment of Spandex Production-Line Simulation System[J]. Journal of Changchun Post and Telecommunication Institute, 2010, 0(6): 587-591 |
| |
| Authors: | SUN Ling-minga LIU Kuna ZHANG Yong-zhong WANG Qiu-shuang |
| |
| Affiliation: | 1a.College of Communication Engineering,Jilin University,Changchun 130025,China;1b.Basic Courses Center of Agriculture Region,Jilin University,Changchun 130062,China;2.Department of Mechanical and Electrical Engineering,Changchun Automobile Industry Institute,Changchun 130011,China) |
| |
| Abstract: | Because the spandex production technology is complex,the production cycle is long and raw material is expensive,it is impossible to do technological parameter optimization experiment and optimize the operation.In order to solve this problem,a simulation system of spandex is built.Then the operation can be carried on this simulation system to optimize the operation,to optimige technological parameter,and to adjust the raw material and formula.After obtaining the success,these optimization methods can be used on the production line.At the same time,this simulation system also provides a good platform for the operators training and the fast diagnosis of equipment failures. |
| |
| Keywords: | spandex polymerization simulation system constraint condition technological parameter |
| 本文献已被 维普 等数据库收录！ |
|
