| 基于SolidWorks的自动打印机圆柱凸轮间歇运动机构设计 |
| |
| 引用本文： | 张鑫,吴海涛,刘泓滨.基于SolidWorks的自动打印机圆柱凸轮间歇运动机构设计[J].新技术新工艺,2014(8):17-18. |
| |
| 作者姓名： | 张鑫 吴海涛 刘泓滨 |
| |
| 作者单位： | 昆明理工大学机电工程学院,云南昆明650500 |
| |
| 摘 要： | 通过对圆柱凸轮间歇运动机构参数的研究及优略性分析,并根据设计任务的效率要求,建立了1个能够使工作台旋转的圆柱凸轮间歇运动机构模型,最后利用SolidWorks软件完成了三维模型的建立和零件的装配,并根据仿真结果对机构进行了优化。该设计能够提高自动打印机的工作效率,对圆柱凸轮间歇运动机构用于不同场合的具体设计有重要的意义。
|
| 关 键 词： | 自动打印机 圆柱凸轮间歇运动机构 SolidWorks 三维模型 |
Design of Automatic Printer Cylindrical Cam Intermittent Motion Mechanism based on SolidWorks |
| |
| ZHANG Xin,WU Haitao,LIU Hongbin.Design of Automatic Printer Cylindrical Cam Intermittent Motion Mechanism based on SolidWorks[J].New Technology & New Process,2014(8):17-18. |
| |
| Authors: | ZHANG Xin WU Haitao LIU Hongbin |
| |
| Affiliation: | (College of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China) |
| |
| Abstract: | Through the cylindrical cam intermittent motion mechanism parametric study and slightly superior analysis, designed a working table rotation of the cylindrical cam intermittent motion mechanism model according to the efficiency re- quirements, finally, completed the three-dimensional model establishment and parts assembly by using SolidWorks, the mechanism was optimized according to the simulation results. The printer was designed to improve the efficiency of automa- tion, and the cylindrical cam intermittent motion mechanism specifically designed for different occasions has important sig- nificance. |
| |
| Keywords: | automatic printer cylindrical cam intermittent motion mechanism SolidWorks 3D model |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
