| 高温合金波纹件粘性介质压力成形过程危险点的数值模拟 |
| |
| 引用本文： | 王新云,夏巨谌,胡国安,王忠金,王仲仁.高温合金波纹件粘性介质压力成形过程危险点的数值模拟[J].锻压装备与制造技术,2003,38(1):50-53. |
| |
| 作者姓名： | 王新云 夏巨谌 胡国安 王忠金 王仲仁 |
| |
| 作者单位： | 1. 华中科技大学,湖北,武汉,430074
2. 哈尔滨工业大学,黑龙江,哈尔滨,150001 |
| |
| 摘 要： | 粘性介质压力成形（Viscous pressure forming,VPF)适合于高强度难变形材料钣金零件的制造。本文应用有限元商业软件DEFORM^TM进行模拟，对比分析采用粘性介质压力和刚性凸模成形高温合金波纹形薄壁件过程中材料危险点的变化。发现前者板料成形的危险点会发生转移，释缓了应力集中，降低了缺陷了发生的可能性。因此，有利于提高板料的菜性。
|
| 关 键 词： | 波纹件 粘性介质压力成形 高温合金 危险点 数值模拟 |
| 文章编号： | 1672-0121(2003)01-0050-04 |
| 修稿时间： | 2002年10月30 |
Numerical Simulation on Critical Point of Superalloy Corrugated Part During Viscous Pressure Forming (VPF) |
| |
| WANG Xinyun,XIA Juchen,HU Guoan,WANG Zhongjin,WANG Zhongren.Numerical Simulation on Critical Point of Superalloy Corrugated Part During Viscous Pressure Forming (VPF)[J].China Metalforming Equipment & Manufacturing Technology,2003,38(1):50-53. |
| |
| Authors: | WANG Xinyun XIA Juchen HU Guoan WANG Zhongjin WANG Zhongren |
| |
| Abstract: | Viscous pressure forming (VPF) is a good sheet metal forming flexible method to manufacture high strength and difficult-to-form material parts. The variation of critical point, during the forming of sheets with VPF and conventional stamping, has been investigated in simulation of the forming process of superalloy corrugated part via the FE commercial software DEFORM? It was found that compared with rigid punch forming, the critical point of the sheet will move during VPF, benefiting to release the stress concentration and decrease the possibility of necking occurrence hence improvement of the formability of sheets. |
| |
| Keywords: | Viscous pressure forming (VPF) Superalloy Critical point Numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
