| 基于UG NX6.0的弧面分度凸轮三维实体建模与仿真加工 |
| |
| 引用本文： | 曹巨江,李龙刚,吕凯归,黎忠炎. 基于UG NX6.0的弧面分度凸轮三维实体建模与仿真加工[J]. 机械设计与制造, 2011, 0(1) |
| |
| 作者姓名： | 曹巨江 李龙刚 吕凯归 黎忠炎 |
| |
| 作者单位： | 陕西科技大学,机电工程学院,西安,710021 |
| |
| 基金项目： | 国家“高档数控机床与基础制造装备”科技重大专项课题(2009ZX04001-014); 陕西科技大学研究生创新基金 |
| |
| 摘 要： | 以弧面分度凸轮工作轮廓面方程为基础,基于UGNX6.0和MATLAB提出了弧面分度凸轮空间轮廓曲面三维实体建模的一种新方法,通过UG运动仿真对建模结果进行分析验证,同时运用UG数控加工模块对弧面分度凸轮的加工刀轨进行了模拟,为空间凸轮机构的设计与数控加工提供了参考依据。
|
| 关 键 词： | 弧面分度凸轮 三维实体建模 数控加工 运动仿真 UG |
3D solid modeling and simulation machining of globoidal indexing cam based on UGNX6.0 |
| |
| CAO Ju-jiang,LI Long-gang,LV Kai-gui,LI Zhong-yan. 3D solid modeling and simulation machining of globoidal indexing cam based on UGNX6.0[J]. Machinery Design & Manufacture, 2011, 0(1) |
| |
| Authors: | CAO Ju-jiang LI Long-gang LV Kai-gui LI Zhong-yan |
| |
| Affiliation: | CAO Ju-jiang,LI Long-gang,LV Kai-gui,LI Zhong-yan(School of Mechatronic Engineering,Shaanxi University of Science and Technology,Xi'an 710021,China) |
| |
| Abstract: | It introduces a new spatial contour surface 3D solid modeling method of globoidal indexing cam based on UG NX6.0 and MATLAB,on the basis of profile surface equation of globoidal indexing cam.The analysis and verification of modeling results through UG motion simulation,the machining tool path simulation of globoidal indexing cam through UG NC machining module,provide a reference for the design and nemercial control machining of the spatial cam mechanism. |
| |
| Keywords: | Globoidal indexing cam 3D solid modeling NC machining Motion simulation UG |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
