| 基于UG的风筛式清选装置参数化系统二次开发 |
| |
| 引用本文： | 周丰旭,李耀明,徐立章. 基于UG的风筛式清选装置参数化系统二次开发[J]. 机械设计与制造, 2011, 0(1) |
| |
| 作者姓名： | 周丰旭 李耀明 徐立章 |
| |
| 作者单位： | 江苏大学农业工程研究院,镇江,212013 |
| |
| 基金项目： | 国家“十一五”科技支撑计划项目(2006BAD11A01) |
| |
| 摘 要： | 阐述了利用UG的建模功能构建风筛式清选装置三维参数化模型的过程,以VC++为开发工具,利用UG/Open API进行风筛式清选装置参数化系统的二次开发,设计MenuScript菜单和UIStyler对话框及其控制程序;在UG环境下,选择风筛式清选装置参数化设计下拉菜单,在弹出的对话框中输入其设计主参数,系统可按设计要求自动生成或更新风筛式清选装置三维模型,大大缩短了产品的开发周期。
|
| 关 键 词： | UG/Open API 参数化设计 UG二次开发 清选装置 |
Parametric design and development of the air and screen cleaning mechanism based on UG |
| |
| ZHOU Feng-xu,LI Yao-ming,XU Li-zhang. Parametric design and development of the air and screen cleaning mechanism based on UG[J]. Machinery Design & Manufacture, 2011, 0(1) |
| |
| Authors: | ZHOU Feng-xu LI Yao-ming XU Li-zhang |
| |
| Affiliation: | ZHOU Feng-xu,LI Yao-ming,XU Li-zhang(Institute of Agricultural Engineering,Jiangsu University,Zhenjiang 212013,China) |
| |
| Abstract: | The process of creating the three-dimensional model of the air and screen cleaning mechanism was described by using the parametric modeling of UG;UG was used as developing platform and VC++ was used as development tool,using UG/Open API to make a secondary development about the parameter part,and by taking the air and screen cleaning mechanism as an example,the development method was introduced.The MenuScript menus,UIStyler dialog boxes and control procedures were designed by using UG/Open API applications ... |
| |
| Keywords: | UG/Open API Parameterized design UG re-development Cleaning unit |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
