Uphill permeation model of gold(III) and its separation from base metals using thiourea derivatives as ionophores across a liquid membrane

This work deals with carrier-facilitated membrane transport of Au(III) from chloride media across a polymer-immobilised liquid membrane (PILM) using as organic reagents N-(thiocarbamoyl)benzamide derivatives and N-benzoylthiourea derivatives, denoted as 2a–c and 3a–f, respectively. Both the composition of the organic membrane solvent and the type of carrier have a marked effect on gold permeation. Recovery and permeability of gold using 2a–c and 3a–f across a PILM proceed in the following order: 3e≈3d≈3c?3f>3b≈3a≈2a≈2b≈2c. In view of the performance of these carriers, 3c was selected as a metal receptor for detailed studies of Au(III) in permeation. A model is presented for the permeation of Au(III) (61 μM) in 0.5 M Cl⁻ at pH 2.5 using 3c as a membrane carrier. The mathematical equations describing the rate of permeation are derived to correlate the membrane permeability coefficient with diffusional and equilibrium parameters. The mass transfer coefficient was calculated from the described model as 1.1×10⁻⁵ m s⁻¹, and the thickness of the aqueous boundary was later calculated to be 65 μm. Several polymeric supports were tested for impregnation of the organic extractant, and Durapore (Millipore) afforded the maximum flux for Au(III), yielding a value of 1.1×10⁻¹⁴ mol m⁻² s. The relationship between flux and support characteristics is derived and a mathematical equation is presented. Of the several diluents used, cumene had the most satisfactory performance in terms of PILM stability and metal transport. Of the different reagents used, 0.5 M sodium thiocyanate in 0.5 M NaCl at pH 2.5 served most efficiently as the stripping agent. More than 80% of the Au(III) could be readily separated using 3c in the presence of various metals such as Cu(II), Fe(III) and Zn(II).