| 电热锅底座注射模设计 |
| |
| 引用本文： | 王敏杰,何祝林,毕洪峰. 电热锅底座注射模设计[J]. 模具工业, 2001, 0(9): 34-35 |
| |
| 作者姓名： | 王敏杰 何祝林 毕洪峰 |
| |
| 作者单位： | 1. 大连理工大学
2. 大连三洋家用电器有限公司 |
| |
| 摘 要： | 通过对电热锅底座塑件结构特点和成型工艺的分析 ,进行了模具结构设计 ,模具采用斜导柱倾斜抽芯 ,镶拼式型腔等结构 ,使模具结构简单合理
|
| 关 键 词： | 电热锅底座 注射模 斜导柱 镶拼 |
| 修稿时间： | 2001-04-02 |
Design of the Injection Mould for the Pedestal of the Electric Pan |
| |
| Wang Minjie et al. Design of the Injection Mould for the Pedestal of the Electric Pan[J]. Die & Mould Industry, 2001, 0(9): 34-35 |
| |
| Authors: | Wang Minjie et al |
| |
| Affiliation: | Wang Minjie et al |
| |
| Abstract: | The structure characteristics and moulding process of the plastic pedestal of the electric pan were analyzed. The structure of the injection mould was designed. The slanted guide pillar core_pulling structure and the insertion and splice cavity structure were adopted so as to make the mould structure simple and reasonable. |
| |
| Keywords: | electric_pan pedestal injection mould slanted guide pillar insertion and splice |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
