Characteristics of the photochemical prevulcanization in a falling film photoreactor

The photochemical prevulcanization of natural rubber (NR) latex via the thiol‐ene reaction is a new approach aiming at the replacement of noxious processing agents used in conventional sulfur vulcanization processes (e.g., accelerators) together with cost saving options. The crosslinking reaction involves the excitation of a selected photoinitiator with ultraviolet (UV) light which is followed by the formation of thioether links due to the thiol‐ene addition reaction. The photochemical process is carried out in a falling film photoreactor which provides not only a continuous prevulcanization process but also exhibits a technology which is already commercially well established. The main advantage of the falling film process lies in the short prevulcanization time and the mild reaction temperature. Following the idea of the manufacture of low‐allergenic surgical gloves made from NR latex without compromising on the glove quality by means of physical performance, crucial process parameters of the falling film process have been determined and characterized in this study. Surgical gloves were made from the photocured NR latex which was prevulcanized using selected process conditions. The physical properties including tensile strength, elongation, modulus, and crosslink density were examined together with the aging stability and the stability against high‐energy radiation (sterilization with gamma rays). It was found that the UV light intensity, the number of illumination cycles, the choice of photoinitiator, and the thiol crosslinker play an important part in the glove quality. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012