| 胶层厚度对拉伸试样应力分布影响的数值分析 |
| |
| 引用本文： | 郑小玲,孔凡荣,游敏,曾志敏. 胶层厚度对拉伸试样应力分布影响的数值分析[J]. 粘接, 2004, 25(5): 30-32 |
| |
| 作者姓名： | 郑小玲 孔凡荣 游敏 曾志敏 |
| |
| 作者单位： | 三峡大学机械与材料学院,湖北,宜昌,443002;三峡大学机械与材料学院,湖北,宜昌,443002;三峡大学机械与材料学院,湖北,宜昌,443002;三峡大学机械与材料学院,湖北,宜昌,443002 |
| |
| 基金项目： | 湖北省教育厅科研计划重大基金项目 (2 0 0 3Z0 0 1)。 |
| |
| 摘 要： | 运用弹塑性有限元法研究了胶层厚度对承受拉伸载荷的对接接头胶层内应力分布的影响．三维有限元法数值分析的结果表明，随胶层厚度减小，胶层中正应力SZ与剪应力SYZ的分布趋于均匀；而对正应力SY而言，胶层厚度为0．15mm时，其边缘峰值应力最低。
|
| 关 键 词： | 胶层厚度 拉伸强度 应力分布 有限元法 对接接头 |
| 文章编号： | 1001-5922(2004)05-0030-03 |
Numerical analysis for effect of adhesive thickness on the stress distribution in butt joint |
| |
| ZHENG Xiao-ling,KONG Fan-yong,YOU Min,ZENG Zhi-min. Numerical analysis for effect of adhesive thickness on the stress distribution in butt joint[J]. Adhesion in China, 2004, 25(5): 30-32 |
| |
| Authors: | ZHENG Xiao-ling KONG Fan-yong YOU Min ZENG Zhi-min |
| |
| Abstract: | The effect of adhesive thickness on the stress distribut io n of butt joint under axial tension loading is numerically analyzed using 3-D f inite element method (FEM). The results obtained show that the distribution of a xial stress (SZ) and shear stress (SYZ) tend to more evenly as the adhesive thic kness decreasing under the research condition. For another axial stress along th e direction of radius (SY) the peak stress near the brim is the lowest when the adhesive thickness is 0.15mm. |
| |
| Keywords: | adhesive thickness tensile strength stress distribution finite-element method butt joint |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
