首页 | 本学科首页   官方微博 | 高级检索  
     

氰化尾渣提金预处理试验研究
引用本文:王君,陈为亮,杨凯华,彭小强. 氰化尾渣提金预处理试验研究[J]. 黄金, 2016, 0(2): 52-55. DOI: 10.11792/hj20160212
作者姓名:王君  陈为亮  杨凯华  彭小强
作者单位:1. 真空冶金国家工程试验室; 云南省有色金属真空冶金重点试验室; 昆明理工大学冶金与能源工程学院;2. 昆明理工大学冶金与能源工程学院
基金项目:教育部创新团队发展计划(IRT1250)
摘    要:针对某选矿厂高硫高砷难处理金矿石经两段焙烧—氰化浸金后产生的尾渣,根据其性质分析,采用硫酸浸铁—硫脲浸金工艺进行提金试验研究。其结果表明:在最优浸铁条件下,即浓硫酸用量45 m L、温度80℃、时间4 h、液固比4∶1,产出的浸铁渣再进行硫脲浸金,铁和金的浸出率分别达到60.37%和63.44%;这表明采用该工艺可有效地从该氰化尾渣中浸出回收金。

关 键 词:氰化尾渣  硫酸浸铁  硫脲浸金

Experimental study on the pretreatment of cyanide tailing before gold extraction
Abstract:According to the property of the cyanide tailings produced from a two-stage roasting-cyanidation gold leaching process to treat high sulfur and arsenic content refractory gold ores from one ore-dressing plant,an experimen-tal research is carried out using sulfuric acid to leach iron and thiourea to leach gold for gold extraction.The results show that under the optimum conditions of iron leaching: sulfuric acid dosage of 45 mL, leaching temperature of 80 ℃,leaching time of 4 h and liquid-solid ratio of 4∶1 .Cyanide residue obtained under those conditions was leached with thiourea,the leaching rate of iron and gold is 60.37%and 63.44%respectively when the iron tailings produced are leached with thiourea.The experiment indicates that the process is effective for gold recovery from cyanide tailings.
Keywords:cyanide tailings  iron leaching with sulfuric acid  gold leaching with thiourea
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号