| 工业纯钛喷丸强化研究 |
| |
| 引用本文： | 张建斌 王静宜 等. 工业纯钛喷丸强化研究[J]. 稀有金属材料与工程, 2001, 30(5): 365-368 |
| |
| 作者姓名： | 张建斌 王静宜 等 |
| |
| 作者单位： | 1. 甘肃工业大学
2. 西安工业学院材料科学与工程系 |
| |
| 基金项目： | 国家自然科学基金资助项目(59571025) |
| |
| 摘 要： | 采用TEM结合SEM和XRD对工业纯钛喷丸强化后显微组织结构、断口形貌、残余应力进行分析，研究了影响疲劳性能的3个因素即：组织、应力、粗糙度。结果表现：孪生是六方合金的塑性变形主要形式，喷丸强化表层形变组织由孪晶和变形带构成，表层孪晶间强烈交互作用，可造成显微损伤；表层残余应力在疲劳后发生明显松驰，有益贡献也相应的降低；表面粗糙度提高，具有负的影响。
|
| 关 键 词： | 喷丸强化 变形孪晶 残余应力 工业纯钛 |
| 文章编号： | 1002-185(2001)05-0365-04 |
| 修稿时间： | 2000-09-06 |
Investigation on the Shot Peening of Commercial Pure-Titanium |
| |
| Zhang Jianbin,Ma Qin,Fan Ding,Zhou Qi,Wang Jingyi. Investigation on the Shot Peening of Commercial Pure-Titanium[J]. Rare Metal Materials and Engineering, 2001, 30(5): 365-368 |
| |
| Authors: | Zhang Jianbin Ma Qin Fan Ding Zhou Qi Wang Jingyi |
| |
| Abstract: | The substructure, fracture morphology and residual stress of shot peened commercial pure titanium were analyzed by the methods of TEM, SEM and XRD. The structure, stress and roughness affecting the fatigue strength were studied in this paper. The results show that twinning plays an important role in plastic deformation of hcp metals, the shot peening layer consists of twins and deformation bands, and the twin interactions can cause micro damage. Fatigue would relax the residual stresses and decrease the strengthening effect. The increased surface roughness has negative effects. |
| |
| Keywords: | titanium shot peening deformation twin residual stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
