| 冷轧钢卷卷取过程内部应力三维分布的研究 |
| |
| 引用本文： | 白振华,连家创,吴彬,王骏飞. 冷轧钢卷卷取过程内部应力三维分布的研究[J]. 钢铁, 2001, 36(9): 42-45 |
| |
| 作者姓名： | 白振华 连家创 吴彬 王骏飞 |
| |
| 作者单位： | 1. 燕山大学
2. 上海宝钢集团公司 |
| |
| 摘 要： | 冷轧钢卷卷取过程中，带材的板形与板凸度以及卷取张力的横向分布决定钢卷内部的应力分布。同时，带材与卷筒之间、带材与带材之间的摩 擦力对应力分布的影响不可忽略。此外，由于层间接触表面缝隙的存在，钢卷必须按各向性体处理。基于上述因素，提出了一套新的三维数学模型，以计算钢卷内部应力分布，并根据降低钢卷在罩式退火粘经率的要求，研究了钢卷的卷取张力制度。
|
| 关 键 词： | 板凸度 卷取张力 摩擦力 三维分布 罩退粘结率 冷轧钢卷 |
RESEARCH OF THREE-DIMENSIONAL DISTRIBUTION OF INTERNAL STRESS IN STRIP COILING PROCESS |
| |
| BAI Zhenhua LIAN Jiachuang WU Bin WANG Junfei. RESEARCH OF THREE-DIMENSIONAL DISTRIBUTION OF INTERNAL STRESS IN STRIP COILING PROCESS[J]. Iron & Steel, 2001, 36(9): 42-45 |
| |
| Authors: | BAI Zhenhua LIAN Jiachuang WU Bin WANG Junfei |
| |
| Affiliation: | BAI Zhenhua LIAN Jiachuang WU Bin WANG Junfei (Yanshan University)(Shanghai Baosteel Group Corp ) |
| |
| Abstract: | In cold strip coiling process, the stress distribution in coil is determined by shape, crown and the transverse distribution of coiling tension At the same time, the influence on stress distribution of friction between strip and drum, between strip and strip can't be ignored In addition, due to the gap between layers, the coil must be treated as anisotropic body Based on above factors, a new three dimensional mathematic model has been developed to calculate the internal stress distribution in coil, and study the coiling tension control to reduce coil sticking rate in the bell type annealing furnace |
| |
| Keywords: | crown coiling tension friction three dimensional distribution coil stick ing rate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
