首页 | 本学科首页   官方微博 | 高级检索  
     

NdFeB粘结磁体性能影响因素的研究
引用本文:沈文娟,王宝奇,谷南驹,于文英.NdFeB粘结磁体性能影响因素的研究[J].河北工业大学学报,2003,32(4):82-86.
作者姓名:沈文娟  王宝奇  谷南驹  于文英
作者单位:1. 河北工业大学,金属材料研究所,天津,300132
2. 河北工业大学,机械工程学院,天津,300130
摘    要:采用快淬NdFeB磁粉,通过粘结方法,制备了NdFeB粘结磁体,探讨了粘结剂、固化温度和模压压力对NdFeB磁体磁性能及力学性能的影响,试验结果表明,与液态环氧树脂相比,选择固态环氧树脂作粘结剂,可获得良好的粘结磁体磁性能和力学性能,其含量范围为2%~3%,固化工艺中的固化温度不宜过低,采用120~150℃之间为宜,在压制过程中,模压压力为600MPa时可以使粘结磁体的密度达到最佳值,且具有较好的磁性能和力学性能。

关 键 词:粘结  粘结剂  NdFeB  磁性材料  快淬粉
文章编号:1007-2373(2003)04-0082-05

Effect on Properties of Bonded NdFeB Magnet
SHEN Wen-juan,WANG Bao-qi,GUNan-ju,YU Wen-ying.Effect on Properties of Bonded NdFeB Magnet[J].Journal of Hebei University of Technology,2003,32(4):82-86.
Authors:SHEN Wen-juan  WANG Bao-qi  GUNan-ju  YU Wen-ying
Abstract:The bonded magnet from rapid quenched NdFeB has been produced, and the influence of the technique factors such as the kind of binder, formation press and solidification on its properties has been analysed. It has shown that the combination with higher magnetic and mechanic properties of the bonded magnet is presented on the basis of proper solidification temperature, 120ccccccccccccccto 150cccccccccccc, and proper press, 600MPa, and the solid epoxy resins with the low epoxy value .
Keywords:bonded  binder  NdFeB  magnetic material  quenched powder  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号