| 35m门式起重机结构设计及有限元分析 |
| |
| 引用本文： | 杨冲. 35m门式起重机结构设计及有限元分析[J]. 机械工程与自动化, 2014, 0(5): 88-89 |
| |
| 作者姓名： | 杨冲 |
| |
| 作者单位： | 昆明船舶设备研究试验中心,云南 昆明650051 |
| |
| 摘 要： | 对门式起重机进行了简要的概述,设计了一种跨度为35m的单梁桁架式门式起重机,根据相关规范对门式起重机的荷载进行计算,确立了门式起重机的6种荷载工况,通过ANSYS分析得知结构参数符合规范要求。
|
| 关 键 词： | 门式起重机 有限元分析 结构设计 |
Structure Design and Finite Element Analysis of 35 m Gantry Crane |
| |
| YANG Chong. Structure Design and Finite Element Analysis of 35 m Gantry Crane[J]. Mechanical Engineering & Automation, 2014, 0(5): 88-89 |
| |
| Authors: | YANG Chong |
| |
| Affiliation: | YANG Chong (Kunming Shipborne Equipment Research and Test Center, Kunming 650051, China) |
| |
| Abstract: | In this paper ,the gantry crane was briefly outlined ,one type of 35 m single girder gantry crane was designed .According to standard of gantry crane ,the load on the crane was calculated ,and 6 kinds of load conditions of the gantry crane were established . The results of analysis by ANSYS indicates that the structural parameters of the gantry crane can meet the requirements of the specification . |
| |
| Keywords: | gantry crane load calculation finite element analysis structure design |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
