| 折臂式随车起重机变幅机构动力学仿真分析 |
| |
| 引用本文： | 马俊,李自贵,晋民杰,王志霞,张帅,冀龙.折臂式随车起重机变幅机构动力学仿真分析[J].机械工程与自动化,2014(5):23-24. |
| |
| 作者姓名： | 马俊 李自贵 晋民杰 王志霞 张帅 冀龙 |
| |
| 作者单位： | 太原科技大学机械工程学院,山西 太原030024 |
| |
| 基金项目： | 太原科技大学大学生创新创业训练项目（xj2013056） |
| |
| 摘 要： | 以某折臂式随车起重机为研究对象,建立其变幅机构力学模型,并对其动臂油缸受力情况进行分析研究。运用Pro/Engineer和ADAMS软件建立样机模型,求得动臂油缸受力,从而确定折臂式随车起重机液压系统的系统压力,并为其整个工作机构优化设计提供理论依据。
|
| 关 键 词： | ADAMS 变幅机构 力学模型 折臂式随车起重机 仿真 |
Dynamic Simulation Analysis of Luffing Mechanism of Articulating Boom Crane |
| |
| MA Jun,LI Zi-gui,JIN Min-jie,WANG Zhi-xia,ZHANG Shuai,JI Long.Dynamic Simulation Analysis of Luffing Mechanism of Articulating Boom Crane[J].Mechanical Engineering & Automation,2014(5):23-24. |
| |
| Authors: | MA Jun LI Zi-gui JIN Min-jie WANG Zhi-xia ZHANG Shuai JI Long |
| |
| Affiliation: | (School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China) |
| |
| Abstract: | Taking an articulating boom crane as study object ,this paper set up the mechanics model of its luffing mechanism ,and analyzed the loads on the movable arm oil cylinder .The prototype model of the luffing mechanism was established by Pro/E and ADAMS ,the force on the moving arm oil cylinder was calculated ,so the system pressure of lorry crane’s hydraulic system was determined .This study provides theoretical basis for the optimization design of the whole working mechanism . |
| |
| Keywords: | ADAMS ADAMS luffing mechanism mechanical model articulating boom crane simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
