首页 | 本学科首页   官方微博 | 高级检索  
     

马氏体-奥氏体组元形态对高强钢焊接热影响区韧性的影响
引用本文:荆洪阳,霍立兴,张玉凤,丰田政男,南二三吉. 马氏体-奥氏体组元形态对高强钢焊接热影响区韧性的影响[J]. 机械工程学报, 1995, 0(6)
作者姓名:荆洪阳  霍立兴  张玉凤  丰田政男  南二三吉
作者单位:天津大学,日本大阪大学
摘    要:采用图象处理的方法,定量分析了高产强钢焊接热影响区粗晶区中马氏体-奥氏体组元(MA组元)的分布形态,并着重研究了MA组元的形态和粗晶区韧性的关系。结果表明:细长MA组元(纵横比≥4)含有率SVf对热影响区韧性有很大影响。SVf的微量增加,韧性急剧下降,但SVf超过某一定值后,由于MA组元相互邻接,韧性劣化趋势得到缓和。

关 键 词:焊接接头,热影响区,图象处理,马氏体-奥氏体组元形态,韧性

MORPHOLOGICAL EFFECT OF MARTENSITE-AUSTENITE CONSTITUENTS ON FRACTURE TOUGHNESS OF WELD HAZ
Jing Hongyang, Huo Lixing, Zhang Yufeng. MORPHOLOGICAL EFFECT OF MARTENSITE-AUSTENITE CONSTITUENTS ON FRACTURE TOUGHNESS OF WELD HAZ[J]. Chinese Journal of Mechanical Engineering, 1995, 0(6)
Authors:Jing Hongyang   Huo Lixing   Zhang Yufeng
Abstract:The morphological effect of martensise-austenite(M-A) constituents in weld coarse grained heat affected zone(CGHAZ) on the toughness is studied qnantitatively with a binary image processor for high strength steel. The results show that the volume fraction of the slender M-A constituents SVf affected the toughness. The toughness was degraded remarkably with the increase of SVf value, but this harm of slender particles was eliminated as SVf value excceed a particular value because of the vicinity effect.
Keywords:Welded joint HAZ Image Procesor Morpkology of M-A constituent Toughness  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号