| 热处理对铸轧— 冷轧铝箔各向异性的影响 |
| |
| 引用本文： | 袁鸽成,张洪云,龙旭红,陈明.热处理对铸轧— 冷轧铝箔各向异性的影响[J].金属热处理,2001(1):21-23. |
| |
| 作者姓名： | 袁鸽成 张洪云 龙旭红 陈明 |
| |
| 作者单位： | 1. 广东工业大学材料系,
2. 中南铝加工有限公司, |
| |
| 摘 要： | 测定了铸轧冷轧铝箔及其退火后沿箔材不同方向的拉伸力学性能。结果表明，冷轧及低温退火后铝箔的力学性能均无明显的各向异性，低温退火时，抗拉强度和伸长率变化很小，当退火温度达到280℃时，随温度的升高，抗拉强度和伸长率显著变化，各向异性增大。在280～320℃之间退火，材料既可不同程度地软化、又能减小各向异性。
|
| 关 键 词： | 热处理 铸轧 冷轧 铝箔 各向异性 |
| 文章编号： | 0254-6051（2001）01－0021－03 |
Effect of Heat Treatment on Anisotropy of Aluminum Foil with Casting-Rolling and Cold-Rolling |
| |
| YUAN Ge-cheng,ZHANG Hong-yun,LONG Xu-hong,CHEN Ming.Effect of Heat Treatment on Anisotropy of Aluminum Foil with Casting-Rolling and Cold-Rolling[J].Heat Treatment of Metals,2001(1):21-23. |
| |
| Authors: | YUAN Ge-cheng ZHANG Hong-yun LONG Xu-hong CHEN Ming |
| |
| Affiliation: | YUAN Ge-cheng~1,ZHANG Hong-yun~2,LONG Xu-hong~2,CHEN Ming~2 |
| |
| Abstract: | Tensile mechanical properties of the aluminum foil with cast-rolling cold-rolling and annealed were tested．The results show that the aluminum foils cold rolled or low temperature annealed have not obvious anisotropy，tensile strength and elongation change a little after low temperature annealing．When annealing temperature reach to 280℃，tensile strength and elongation change obviously，anisotropy increases with increasing temperature．In the range of 280 to 320℃，not the foils only can be soften，but also，the anisotropy can be decreased． |
| |
| Keywords: | heat treatment casting-rolling cold-rolling aluminum foil anisotropy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
