Nanocomposites of poly(propylene carbonate) reinforced with cellulose nanocrystals via sol‐gel process |
| |
Authors: | Xinhang Wang Yumin Xia Peng Wei Yuwei Chen Yanping Wang Yimin Wang |
| |
Affiliation: | State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, People's Republic of China |
| |
Abstract: | Cellulose nanocrystals (CNCs) organogels were first produced from aqueous dispersion through solvent exchange of CNCs to acetone via a simple sol‐gel process. After mixing the organogels with poly(propylene carbonate) (PPC) in dimethylformamide followed by solution casting, green nanocomposites were obtained with CNCs well dispersed in PPC polymer matrix which was confirmed by scanning electron microscopy observations. Differential scanning calorimeter analysis revealed that glass transition temperature of the nanocomposites was slightly increased from 34.0 to 37.4°C. Tensile tests indicated that both yield strength and Young's modulus of CNCs/PPC nanocomposites were doubled by adding 10 wt % CNCs. However, poor thermal stability of PPC occurred after incorporating with CNCs due to the thermo‐sensitive sulfate groups located on the surface of CNCs. Furthermore, PPC became more hydrophilic because of the inclusion of CNCs according to the water contact angle measurement. The enhanced mechanical and hydrophilic properties, coupled with the inherent superior biocompatibility and degradability, offered CNCs/PPC composites potential application in biomedical fields. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40832. |
| |
Keywords: | cellulose composites nanocrystals poly(propylene carbonate) sol‐gel process |
|
|