Foam stability and polymer phase morphology of flexible polyurethane foams synthesized from castor oil

Foam stability and segmented polymeric phase morphology of polyurethane foams synthesized partially and completely from castor oil are investigated. Preliminary analysis of the impact of alterations in the polymeric phase on macroscopic stress dissipation in foams is also carried out. The stability and morphology show unique trends depending on the concentration of castor oil used in foam synthesis. While low and intermediate concentrations of castor oil does not significantly affect the foaming process; at high concentrations, the volumetrically expanding liquid matrix remains in a nonequilibrium state during the entire foaming period, resulting in significant foam decay from top. This increases the final foam cell density and decreases the plateau border thickness at bottom. In the polymeric phase of castor oil based foams, the fraction of monodentate urea increases at the cost of non‐hydrogen bonded urea. These monodentate urea domains undergo flocculation in foams synthesized completely from castor oil, thus prominently modifying the segmented morphology. The glass transition temperature of soft segments of partially substituted foams shows moderate increase, with indications of phase mixing between the polyether and castor oil generated urethane domains. Foams synthesized entirely from castor oil have significant sol fraction due to unreacted oligomers. The microscopic alterations in polymeric phase reduce the elastic recovery of partially substituted castor oil foams compared to its viscous dissipation under an applied stress. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40668.