首页 | 本学科首页   官方微博 | 高级检索  
     

氧化铝增强无机硅酸锌耐蚀抗磨涂层的研究
引用本文:马峰,陈华辉,王亦工,裴嵩峰,张婷,桑玮玮. 氧化铝增强无机硅酸锌耐蚀抗磨涂层的研究[J]. 中国表面工程, 2007, 20(2): 26-29
作者姓名:马峰  陈华辉  王亦工  裴嵩峰  张婷  桑玮玮
作者单位:中国矿业大学(北京)材料科学与工程学院,北京,100083
摘    要:无机硅酸锌涂层常用于大型金属结构件的重防腐保护。文中对氧化铝增强无机硅酸锌涂层进行了研究,结果表明;在试验条件下,氧化铝增强无机硅酸锌涂层的耐蚀性提高了6倍;涂层的滑动摩擦因数为0.2左右,耐磨损性能提高了3倍。氧化铝增强无机硅酸锌涂层为钢铁材料表面的防护提供了新思路和新方法,具有广阔的应用前景。

关 键 词:氧化铝 无机硅酸锌涂层 耐蚀性 耐磨性
文章编号:1007-9289(2007)02-0026-04
修稿时间:2006-12-12

Study of Anticorrosive & Anti-wear Inorganic Zinc Silicate Coatings Reinforced by Alumina
MA Feng,CHEN Hua-hui,WANG Yi-gong,PEI Song-feng,ZHANG Ting,SANG Wei-wei. Study of Anticorrosive & Anti-wear Inorganic Zinc Silicate Coatings Reinforced by Alumina[J]. China Surface Engineering, 2007, 20(2): 26-29
Authors:MA Feng  CHEN Hua-hui  WANG Yi-gong  PEI Song-feng  ZHANG Ting  SANG Wei-wei
Abstract:Inorganic zinc silicate coatings are frequently used in the heavy-duty anticorrosive protection of large-scale metal structures. Inorganic zinc silicate coatings reinforced by alumina were described at the test condition in this paper. The results showed that the corrosion resistance of coatings was raised 6 times and its wear-resistance was increased 3 times than that of plain coatings. Furthermore, the results indicated that the sliding frictional coefficient of the new coating was about 0.2. Inorganic zinc silicate coatings reinforced by alumina provided a new idea and method for the protection of steel surfaces. It exhibited a broad application prospect.
Keywords:alumina   inorganic zinc silicate coatings   corrosion resistance    wear-resistance
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《中国表面工程》浏览原始摘要信息
点击此处可从《中国表面工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号