两边连接双层钢板剪力墙承载力性能研究 |
| |
引用本文: | 谭燕秋,宫玉侠,吴欣.两边连接双层钢板剪力墙承载力性能研究[J].河北工程大学学报,2013,30(4):8-12. |
| |
作者姓名: | 谭燕秋 宫玉侠 吴欣 |
| |
作者单位: | 河北工程大学, |
| |
摘 要: | 采用有限元软件ANSYS对上端简支、下端固定的双层钢板剪力墙进行静力荷载作用下的分析,研究了钢板厚度、混凝土厚度、跨高比、螺栓间距等因素对极限承载力的影响。结果表明,适当的混凝土板厚度,能有效的阻止钢板的侧向屈曲,对提高剪力墙的极限承载力存在有利影响;钢板的极限承载力随钢板厚度和跨高比的增大而增高,随螺栓间距的增大而降低,选取合适的材料厚度和尺寸对双钢板剪力墙在结构中的应用有重要的意义。
|
关 键 词: | 双层钢板剪力墙 两边连接 极限承载力 抗剪静力性能 |
收稿时间: | 2013/9/24 0:00:00 |
The bearing capacity performance of two-side connected steel-plate-steel shear wall |
| |
Authors: | TAN Yan-qiu GONG Yu-xia and WU Xin |
| |
Affiliation: | College of Civil Engineering,Hebei University of Engineering;College of Civil Engineering,Hebei University of Engineering;College of Civil Engineering,Hebei University of Engineering |
| |
Abstract: | Using the finite element software ANSYS upper simply supported , the lower fixed double steel wall for static loads analysis, research the plate thickness , the thickness of concrete , cross- height ratio , the bolt spacing and other factors on ultimate bearing capacity . Results indicates that, appropriate thickness of the concrete slab , which can effectively prevent the lateral plate buckling, shear walls to improve the beneficial effects of the presence of the ultimate strength; Ultimate bearing capacity of steel plate with thickness and cross- height ratio increases with increased spacing increases with lower bolt , select the appropriate material thickness and dimensions of the double steel plate shear walls in the structure of the application has an important significance. |
| |
Keywords: | double steel plate shear wall connect both sides ultimate strength shear static performance |
|
| 点击此处可从《河北工程大学学报》浏览原始摘要信息 |
|
点击此处可从《河北工程大学学报》下载全文 |
|