首页 | 本学科首页   官方微博 | 高级检索  
     

2 GHz宽带低损耗SAW滤波器的研制
引用本文:蒋欣,金剑,冷俊林,蒋世义,董加和,胡杨,刘晓莉.2 GHz宽带低损耗SAW滤波器的研制[J].压电与声光,2014,36(1):16-18.
作者姓名:蒋欣  金剑  冷俊林  蒋世义  董加和  胡杨  刘晓莉
作者单位:中国电子科技集团公司第26研究所,重庆 400060
摘    要:利用射频电路模拟软件中构建的声表面波(SAW)低损耗滤波器设计工具,对S波段SAW滤波器的设计技术展开研究。通过建立集总参数模型,分析高频下封装效应对滤波器性能的影响,并成功研制出中心频率达2.2GHz,最小插入损耗为-3dB,相对带宽达到7%的SAW滤波器,测试与仿真结果基本一致。

关 键 词:S波段  声表面波滤波器  低损耗

Development of Wideband and Low IL SAW Filter at 2 GHz
JIANG Xin,JIN Jian,LENG Junlin,JIANG Shiyi,DONG Jiahe,HU Yang and LIU Xiaoli.Development of Wideband and Low IL SAW Filter at 2 GHz[J].Piezoelectrics & Acoustooptics,2014,36(1):16-18.
Authors:JIANG Xin  JIN Jian  LENG Junlin  JIANG Shiyi  DONG Jiahe  HU Yang and LIU Xiaoli
Affiliation:26th Institute of China Electronics Technology Group Corporation,Chongqing 400060,China
Abstract:In this paper, a new SAW filter design tool based on RF circuit design software has been developed. Using this new design tool, the design methods of S band SAW filter has been investigated. In order to analysize the packaging on the performances of SAW filter under high frequency, the lumped parameter model of packaging has been established. A SAW filter at 2.2 GHz,with the insertion loss of -3 dB and the relative band width of 7%, has been developed. The simulation result and measurement result almost agreed well.
Keywords:S band  surface acoustic wave filter  low loss
本文献已被 CNKI 等数据库收录!
点击此处可从《压电与声光》浏览原始摘要信息
点击此处可从《压电与声光》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号