首页 | 本学科首页   官方微博 | 高级检索  
     

POE发泡材料性能研究
引用本文:陈之东,钟宁庆. POE发泡材料性能研究[J]. 橡塑技术与装备, 2010, 36(12): 6-9. DOI: 10.3969/J.ISSN.1009-797X.2010.12.002
作者姓名:陈之东  钟宁庆
作者单位:中国皮革和制鞋工业研究院,北京100015
基金项目:科技部科研院所技术开发专项,科技部国际科技合作项目
摘    要:对乙烯-辛烯共聚物(POE)发泡体系的活化剂氧化锌、硬脂酸锌、硬脂酸用量,交联剂过氧化二异丙苯用量,发泡剂偶氮二甲酰胺用量、填充剂滑石粉用量进行了研究,得出了各配合剂的最佳用量。经研究发现,在POE发泡材料中,当ZnO用量为2份、ZnSt用量为1.2份、St用量为0.5份、DCP用量为1份、滑石粉用量为15~20份时,材料的综合性能最好,发泡剂AC的用量应根据不同产品的要求进行调整。

关 键 词:POE  活化剂  交联剂  发泡剂  填充剂

Research on properties of POE foam material
Chen Zhidong,Zhong Ningqing. Research on properties of POE foam material[J]. China Rubber/Plastics Technology & Equipment, 2010, 36(12): 6-9. DOI: 10.3969/J.ISSN.1009-797X.2010.12.002
Authors:Chen Zhidong  Zhong Ningqing
Affiliation:(China Leather and Footwear Industry Research Institute,Beijing 100015,China)
Abstract:Research on dosage of activators(zinc oxide,zinc stearate,stearic acid),dosage of crosslinking agent(dicumyl peroxide),dosage of blowing agent(azodicarbonamide),and dosage of filler(talc) in the ethylene-octene copolymer(POE) foam system.The study found that,in the POE foam material,when ZnO content is 2,ZnSt content is 1.2,St content is 0.5,DCP content is 1,talc content is 15 ~20,the material's overall performance is the best,the dosage of AC blowing agent should base on the requirements of different products.
Keywords:POE  activator  cross-linking agent  blowing agent  filler
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号