Interfacial reaction and joint reliability of fine-pitch flip-chip solder bump using stencil printing method |
| |
| Authors: | Sang-Su Ha Jong-Woong Kim Jin-Ho Joo Seung-Boo Jung |
| |
| Affiliation: | a School of Advanced Materials Science and Engineering, Sungkyunkwan University, 300 Cheoncheon-dong, Jangan-Gu, Suwon 440-746, South Korea
b Department of Advanced Mechanical Engineering, Chung-ang University, 221 Heukseok-dong, Dongjak-Gu, Seoul 155-756, South Korea |
| |
| Abstract: | This study was focused on the formation and reliability evaluation of solder joints with different diameters and pitches for flip chip applications. We investigated the interfacial reaction and shear strength between two different solders (Sn-37Pb and Sn-3.0Ag-0.5Cu, in wt.%) and ENIG (Electroless Nickel Immersion Gold) UBM (Under Bump Metallurgy) during multiple reflow. Firstly, we formed the flip chip solder bumps on the Ti/Cu/ENIG metallized Si wafer using a stencil printing method. After reflow, the average solder bump diameters were about 130, 160 and 190 μm, respectively. After multiple reflows, Ni3Sn4 intermetallic compound (IMC) layer formed at the Sn-37Pb solder/ENIG UBM interface. On the other hand, in the case of Sn-3.0Ag-0.5Cu solder, (Cu,Ni)6Sn5 and (Ni,Cu)3Sn4 IMCs were formed at the interface. The shear force of the Pb-free Sn-3.0Ag-0.5Cu flip chip solder bump was higher than that of the conventional Sn-37Pb flip chip solder bump. |
| |
| Keywords: | Flip chip Interfacial reaction Stencil printing Bump shear test Joint reliability |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
