| 爆炸焊接工艺对铝-钢复合板界面性能的影响 |
| |
| 引用本文： | 王建民,朱锡,刘润泉.爆炸焊接工艺对铝-钢复合板界面性能的影响[J].武汉理工大学学报,2007,29(7):103-105. |
| |
| 作者姓名： | 王建民 朱锡 刘润泉 |
| |
| 作者单位： | 海军工程大学船舶与海洋工程系,武汉,430033 |
| |
| 摘 要： | 通过不同的爆炸焊接工艺对铝合金-铝-钢进行了爆炸复合，并对爆炸复合后的铝合金-铝-钢复合板的界面组织及力学性能进行了测试分析，探讨了不同爆炸焊接工艺对铝合金-铝-钢复合板界面性能的影响。结果表明：铝合金-铝-钢复合板的铝-钢界面在爆炸复合时界面容易产生一层金属间化合物。随着装药密度的增加，中间层变得愈加连续，界面强度降低明显，而铝-钢界面相互扩散距离变化不明显。
|
| 关 键 词： | 爆炸焊接 界面 结合性能 微观分析 复合板 |
| 文章编号： | 1671-4431（2007）07-0103-03 |
| 修稿时间： | 2007-03-02 |
Effect of Explosive Welding Technology on Bonding Interface Property of Aluminum-steel Cladding |
| |
| WANG Jian-min,ZHU Xi,LIU Run-quan.Effect of Explosive Welding Technology on Bonding Interface Property of Aluminum-steel Cladding[J].Journal of Wuhan University of Technology,2007,29(7):103-105. |
| |
| Authors: | WANG Jian-min ZHU Xi LIU Run-quan |
| |
| Abstract: | Aluminum-aluminum-steel cladding was made by different explosive welding technologies. Micro-structures and properties of the bonding interfaces had been tested and analyzed. According to the results, the effect of the explosive welding technology on the bonding interfaces properties had been discussed. The results showed that a layer of hard compounds was produced between aluminum and steel during explosive welding process. The interlayer becomes more continuous as density of explosive was increasing. However, the diffusion distance had no remarkable change with the density of explosive increasing. |
| |
| Keywords: | explosive welding interface bonding performance micro-analysis aluminum-steel cladding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
