Effects of high hydrostatic pressure on the mechanical behavior of a crystalline polymer–polyoxymethylene

The true stress-true strain behavior of polyoxymethylene, n(-CH₂O), as an example of a bulk semi-crystalline polymer, has been investigated for constant hydrostatic environmental pressures from 1 atmosphere to 8 kilobars with the principal objectives of elucidating the factors controlling flow and fracture. Experiments were conducted in uniaxial tension at room temperature and constant strain rate. The tensile observations were supplemented by measurements of bulk compressibility and stress relaxation behavior at pressure. In contrast with metals and inorganic compounds, the modulus, yield stress and fracture stress of POM increase strongly with pressure by a factor of approximately three at 8 kilobars. The modulus increase is shown from the stress relaxation measurements to be associated with a pressure-induced increase in the β-transition temperature which points to the potential usefulness of the concept of pressure-temperature super-position of mechanical behavior. The characteristics of the pressure dependence of the yield stress demonstrate that yield criteria based on continum mechanics considerations, including the Mohr or Coulomb-Navier criterion, are not valid for general deformation (non-plane strain) conditions in this polymer. The concept of a critical volume change determining the initiation of yielding is suggested to be applicable to semi-crystalline polymers. Comparison with analogous changes in yield stress with temperature points to an increasing contribution to the control of yielding by the initially disordered regions with increasing pressure or decreasing temperature. The fracture behavior observed at pressure eliminates the concepts of a critical stress as a fracture criterion for POM and of a simple reduction in normal stress at points of stress concentration as the principal effect of the applied pressure on fracture.