首页 | 本学科首页   官方微博 | 高级检索  
     

管道漏磁检测的二维数值模拟研究
引用本文:周松强,唐永刚,宁建国. 管道漏磁检测的二维数值模拟研究[J]. 计算机测量与控制, 2006, 14(8): 1000-1003
作者姓名:周松强  唐永刚  宁建国
作者单位:北京理工大学,爆炸科学与技术国家重点实验室,北京,100081;北京理工大学,爆炸科学与技术国家重点实验室,北京,100081;北京理工大学,爆炸科学与技术国家重点实验室,北京,100081
摘    要:在管道漏磁检测中,缺陷的定量识别一直是个难题,运用有限元分析的方法,建立了漏磁场的数学模型,然后采用有限元分析软件ANSYS建立了漏磁检测装置分析的模型,并进行了二维静态情况的仿真,获得了不同缺陷所产生的漏磁信号,并把这些结果和实验结果进行了比较分析;从这些结果中可以得出了缺陷的特征与其所产生的漏磁信号的特征之间的对应关系,采用仿真的方法来研究漏磁信号的定量识别问题并取得较好的识别效果。

关 键 词:漏磁检测  有限元分析  ANSYS  缺陷  数值模拟
文章编号:1671-4598(2006)08-1000-04
收稿时间:2005-11-15
修稿时间:2005-12-10

Research on Numerical Simulation of Two- Dimensional Magnetic Flux Leakage Inspection of Pipelines
Zhou Songqiang,Tang Yonggang,Ning Jianguo. Research on Numerical Simulation of Two- Dimensional Magnetic Flux Leakage Inspection of Pipelines[J]. Computer Measurement & Control, 2006, 14(8): 1000-1003
Authors:Zhou Songqiang  Tang Yonggang  Ning Jianguo
Affiliation:State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China
Abstract:In magnetic flux leakage(MFL) testing of pipelines,quantitatively classifying defects remains to be a difficult problem.A mathematical model of MFL field is presented based on the basic theory of finite element(FE) method,and a two-dimensional FE model of MFL testing system is also established adopting ANSYS program to simulate magnetostatics,from which MFL signals produced by different defects are obtained.The numerical results agree well with the experimental data.The relation between defect character and MFL signal character is obtained by analyzing the numerical results,which is valuable to quantitatively classify defects.
Keywords:ANSYS
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号