| 钛炉胆穿孔腐蚀现象研究 |
| |
| 引用本文： | 李辉,史建卫,杨冀丰,李明雨,谢军. 钛炉胆穿孔腐蚀现象研究[J]. 电子工业专用设备, 2008, 37(12) |
| |
| 作者姓名： | 李辉 史建卫 杨冀丰 李明雨 谢军 |
| |
| 作者单位： | 哈尔滨工业大学现代焊接生产技术国家重点实验室;日东电子科技(深圳)有限公司 |
| |
| 摘 要： | 钛合金具有优越的抗腐蚀性能,被广泛地用作波峰焊机的炉胆材质。但是在使用有铅钎料进行波峰焊接时,常出现穿孔现象。通过采用DES、XRD和SEM等分析手段对其进行了深入地分析,研究了在有铅钎料的使用过程中钛合金的腐蚀机理。
|
| 关 键 词： | 钛合金 穿孔腐蚀 有铅钎料 |
Research on Perforation of Wave Soldering Pot with Ti Alloy |
| |
| LI Hui,SHI Jian-wei,YANG Ji-feng,LI Ming-yu,XIE Jun. Research on Perforation of Wave Soldering Pot with Ti Alloy[J]. Equipment for Electronic Products Marufacturing, 2008, 37(12) |
| |
| Authors: | LI Hui SHI Jian-wei YANG Ji-feng LI Ming-yu XIE Jun |
| |
| Abstract: | Titanium alloy is provided with excellent performance for anticorrosive, which is widely used for material of wave soldering pot. However, when the lead solder is used in the wave soldering, there is perforation phenomenon in this pot with titanium alloy. With the analytic means of DES, XRD and SEM, this paper research corrosive mechanism. |
| |
| Keywords: | Titanium alloy Perforation Lead solder |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
