| 超高相对分子质量聚乙烯纤维拉伸工艺研究 |
| |
| 引用本文： | 朱凤岩,张绍丽,唐世俊.超高相对分子质量聚乙烯纤维拉伸工艺研究[J].合成纤维工业,2001,24(2):16-17,24. |
| |
| 作者姓名： | 朱凤岩 张绍丽 唐世俊 |
| |
| 作者单位： | 北京合成纤维实验厂研究所, |
| |
| 摘 要： | 通过对冻胶纺丝、初步拉伸、再萃取后的超高相对分子质量聚乙烯纤维 (UHMWPE)的拉伸温度、拉伸倍数、热定型温度等的理论分析 ,指出 U HMWPE的拉伸温度应设定在熔点附近 ,确定了拉伸倍数及定型时应满足的拉伸倍数公式 ,热定型温度应低于上一道拉伸温度。
|
| 关 键 词： | 理论分析 冻胶纺丝 超高相对分子质量聚乙烯纤维 拉伸工艺 |
| 文章编号： | 1001-0041(2001)02-0016-02 |
STUDY ON DRAWING OF UHMWPE FIBER |
| |
| Zhu Fengyan,Zhang Shaoli,Tang Shiju.STUDY ON DRAWING OF UHMWPE FIBER[J].China Synthetic Fiber Industry,2001,24(2):16-17,24. |
| |
| Authors: | Zhu Fengyan Zhang Shaoli Tang Shiju |
| |
| Abstract: | The drawing parameters of UHMWPE fibers after gel spinning, initial drawing and extraction was decided by theoretical analysis on the drawing temperature and drawing ratio of UHMWPE fibers. The formula of drawing ratio was initially verified by the spinning test. |
| |
| Keywords: | theoretical analysis gel spinning UHMWPE fiber drawing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
