Characterizations of pore and constituent particle populations in 7050-T7451 aluminum plate alloys |
| |
Authors: | Jimin Zhang Marek A. Przystupa Annetta J. Luévano |
| |
Affiliation: | (1) Seagate Substrates, 92807 Anaheim, CA;(2) the Department of Materials Science and Engineering, University of California, 90095-1595 Los Angeles, CA |
| |
Abstract: | Although qualitative relationships between fatigue lives and the sizes of the microstructural features, such as pores and particles, are well known, the quantitative models are lacking because of the unavailability of the required detailed microstructural data. The purpose of this work was to obtain such data for the high porosity (HP) and reduced porosity (RP) variants of the aluminum 7050-T7451 thick-plate alloys. Both alloys had similar tensile and fracture properties, but the reduced porosity variant showed superior fatigue performance attributed to the smaller sizes of the fatigue crack initiating particles and pores. Those size differences, as well as the differences in the through-thickness size gradients, have been characterized in this work. The sizes, shapes, and orientations of particles and pores were analyzed first on the plane sections and then converted to the true three-dimensional (3-D) characteristics using the moment method. In the conversions, the particle and pore shapes have been assumed as triaxial ellipsoids and their size distributions as lognormal. The spatial distributions were quantified using the nearest neighbor spacing method. Results confirmed that the reduced porosity alloy had smaller particles and pores than the high porosity variant. The size distributions in the former were also more confined. In both alloys, the largest particles and pores were at the plate centers and the smallest at the surface. Their spatial distributions could be categorized as random with clusters. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|