| 用接触式坐标测量进行自由曲面反求的方法研究 |
| |
| 引用本文： | 高国军,陈康宁,张申生. 用接触式坐标测量进行自由曲面反求的方法研究[J]. 机械科学与技术, 2000, 19(1): 94-96 |
| |
| 作者姓名： | 高国军 陈康宁 张申生 |
| |
| 作者单位： | [1]上海交通大学 [2]西安交通大学 |
| |
| 基金项目： | 中国博士后基金，国家 863高科技计划! ( 863 -5 11-0 8-0 145 ) |
| |
| 摘 要： | 分析了逆向工程中自由曲面的反求过程 ,对接触式和非接触式测量方法进行了比较。针对工程实际应用的要求 ,提出了一种等距面指导的精度可控 ,测量过程能够自动进行的数字化方法。该方法采用接触式测量的 CMM作为数字化设备 ,解决了已往接触式测量不易进行精确控制以及人工操作劳动强度大的缺点。
|
| 关 键 词： | 逆向工程 自由曲面 坐标测量机 |
| 文章编号： | 1003-8728(2000)01-0035-03 |
| 修稿时间： | 1998-12-08 |
Study on Methodof SculpturedSurface Measuring in ReverseEngineering Environment with Touch-Trigger Probe |
| |
| GAO Guo jun ,CHEN Kang ning,ZHANG Shen sheng. Study on Methodof SculpturedSurface Measuring in ReverseEngineering Environment with Touch-Trigger Probe[J]. Mechanical Science and Technology for Aerospace Engineering, 2000, 19(1): 94-96 |
| |
| Authors: | GAO Guo jun CHEN Kang ning ZHANG Shen sheng |
| |
| Affiliation: | GAO Guo jun 1,CHEN Kang ning,ZHANG Shen sheng |
| |
| Abstract: | Method for sculptured surface measuring in reverse engineering environment is studied. Difference between touch probe and no touch probe inspection was analyzed. A digitization approach using coordinator measuring machine with touch trigger probe is proposed, which can be automatically executed and the accuracy can be controlled by times of iteration. Using this method can effectively lighten the heavy manual manipulation. |
| |
| Keywords: | Reverse engineering Sculptured surface Coordinator measuring machine |
| 本文献已被 CNKI 维普 等数据库收录！ |
