| 螺纹钢切分轧制弧边方孔中轧件变形有限元分析 |
| |
| 引用本文： | 曹杰,阎军,章静.螺纹钢切分轧制弧边方孔中轧件变形有限元分析[J].安徽工业大学学报,2003,20(3):185-188. |
| |
| 作者姓名： | 曹杰 阎军 章静 |
| |
| 作者单位： | 安徽工业大学冶金与材料学院 安徽马鞍山243002
(曹杰，阎军)，安徽工业大学冶金与材料学院 安徽马鞍山243002(章静) |
| |
| 基金项目： | 安徽省教委科研计划项目(99J10173) |
| |
| 摘 要： | 采用三维大变形弹塑性热力耦合的方法分析了螺纹钢切分轧制中弧边方孔的来料形状对金属变形及前滑的影响。弧边方孔前采用3种不同的孔型可获得3种不同形状的坯料。计算结果表明，弧边方孔前采用菱-椭孔较为合适，建议应用中采用菱-椭孔。
|
| 关 键 词： | 切分轧制 孔型 变形 前滑 |
| 文章编号： | 1671-7872(2003)03-0185-04 |
| 修稿时间： | 2002年10月25 |
Finite element simulation of metal deformation in fluted-square pass during slit rolling of deformed bars |
| |
| CAO Jie,YAN Jun,ZHANG Jing.Finite element simulation of metal deformation in fluted-square pass during slit rolling of deformed bars[J].Journal of Anhui University of Technology,2003,20(3):185-188. |
| |
| Authors: | CAO Jie YAN Jun ZHANG Jing |
| |
| Abstract: | D elasto -plastic thermo -mechani cal coupled FEM for large strain has b een used to analyze the effect on metal deformation and forw ard slip of different pass configura tion before the fluted -square pass d uring slit rolling of deformed bars.In order to get different kinds of billets,thre e different kinds of pass configurations were adopted.The results indicate that diamond -oval is the suitable pass con figuration before the fluted -square pass.Therefore,the diamond -oval pass is suggested in application. |
| |
| Keywords: | slit rolling pass deformation fo rward slip |
| 本文献已被 CNKI 维普 等数据库收录！ |
