Analytical modelling of slot milling exit burr size

A computational model was recently proposed by authors to approximate the tangential cutting force and consequently predict the thickness of the exit up milling side burr. To calculate the cutting force, the specific cutting force coefficient with respect to material properties was used. The model was sensitive to material yield strength and few cutting and tool geometrical parameters. However, the effects of cutting speed, tool coating, and tool rake angle on burr size were neglected. Other phenomena that could affect the burr size such as friction and abrasion were not taken into account either. Therefore, in the current work, a mechanistic force model is incorporated to propose a burr size prediction algorithm. The tangential and radial forces are calculated based on using specific cutting force coefficients in each direction. Furthermore, using the new approach, the burr size is predicated and the effects of a broad range of cutting parameters on burr size and friction angle are evaluated. Experimental values of burr size correlated well with prediction. It was found that the cutting speed has negligible effects on force and burr size. Lower friction angle was recorded when using larger feed per tooth. Consequently, thinner exit up milling side burr was obtained under high friction angle.