| 大型铝合金焊接件焊后去应力时效的工艺研究 |
| |
| 引用本文： | 张凤丽,何显平.大型铝合金焊接件焊后去应力时效的工艺研究[J].贵州电力技术,2010(6):81-82. |
| |
| 作者姓名： | 张凤丽 何显平 |
| |
| 作者单位： | [1]贵州航天天马机电科技有限公司,贵州贵阳550001 [2]贵州航天乌江机电设备有限责任公司,贵州贵阳550001 |
| |
| 摘 要： | 通过人工时效处理的方法可以使焊接结构件中的材料ZL101A由T4状态达到T5状态，并且可以减少大型铝合金焊接结构件焊接变形，降低焊接后的残余应力．
|
| 关 键 词： | 铝舍金 焊接 人工时效 |
Technology research on distressing aging of welded structures of large aluminum alloy after welding |
| |
| Zhang Fengli,He Xianping.Technology research on distressing aging of welded structures of large aluminum alloy after welding[J].Guizhou Electric Power Technology,2010(6):81-82. |
| |
| Authors: | Zhang Fengli He Xianping |
| |
| Affiliation: | 1. Tianma Aerospace Mechanical and Electrical Technology Co., Ltd. Guiyang 550001 Guizhou China; 2. Wujiang Aerospace electromechanical equipment Co., Ltd. Guizhou China Guiyang 550001 Guizhou China) |
| |
| Abstract: | Materials ZL101A can from T4 to T5 state in welded structure by artificial aging treatment method, moreover,this method can reduce welding distortion of welded structures of large aluminum alloy, and lower residual stress after welding. |
| |
| Keywords: | aluminum alloy welding artificial aging |
| 本文献已被 维普 等数据库收录！ |
