首页 | 本学科首页   官方微博 | 高级检索  
     

角蛋白/聚乙烯醇纺丝溶液流变性能的研究
引用本文:刘艳伟,刘维锦,刘东发. 角蛋白/聚乙烯醇纺丝溶液流变性能的研究[J]. 合成纤维工业, 2006, 29(6): 27-29
作者姓名:刘艳伟  刘维锦  刘东发
作者单位:华南理工大学材料学院,广州,广州,510640
摘    要:采用角蛋白溶液与聚乙烯醇溶液共混制备纺丝溶液,探讨了角蛋白含量、温度、溶液浓度对纺丝溶液流变性能的影响。结果表明,不同角蛋白含量的角蛋白/聚乙烯醇纺丝溶液均为切力变稀流体;增加角蛋白含量、升高温度都有利于改善纺丝溶液的流变性和可纺性。纺丝溶液温度不超过70℃,溶液浓度不超过15%时,其流变性能较好。

关 键 词:角蛋白  聚乙烯醇  共混  流变性能
文章编号:1001-0041(2006)06-0027-03
收稿时间:2006-04-05
修稿时间:2006-10-19

Study on rheological behavior of keratin/polyvinyl alcohol spinning solution
Liu Yanwei,Liu Weijin,Liu Dongfa. Study on rheological behavior of keratin/polyvinyl alcohol spinning solution[J]. China Synthetic Fiber Industry, 2006, 29(6): 27-29
Authors:Liu Yanwei  Liu Weijin  Liu Dongfa
Affiliation:College of Material Science and Engineering, South China University of Technology, Guangzhou 510640
Abstract:Keratin solution was blended with polyvinyl alcohol solution to prepare spinning solution. The effects of keratin content, temperature, concentration on the rheological behavior of the spinning solution were discussed. The results showed that the keratin/polyvinyl alcohol spinning solution belonged to shear thinning fluid no matter the keratin content. Increasing keratin content and elevating temperature both helped the improvement of the rheological behavior and spinnability of spinning solution. The rheological behavior was optimized at solution temperature and concentration not higher than 70℃and 15% , respectively.
Keywords:keratin  polyvinyl alcohol  blend  rheological behavior
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号