首页 | 本学科首页   官方微博 | 高级检索  
     

4流中间包钢液流动行为研究
引用本文:李静敏,李怡宏,王平安,王敏,张立强,包燕平. 4流中间包钢液流动行为研究[J]. 连铸, 2012, 31(1): 9-12
作者姓名:李静敏  李怡宏  王平安  王敏  张立强  包燕平
作者单位:1. 河南凤宝特钢有限公司,河南 安阳 456550 2. 北京科技大学冶金与生态工程学院,北京 100083
摘    要:通过水模型试验对4流方坯中间包在不同控流装置下包内流体流动动行为进行研究。研究结果表明:原中间包由于流体流速快导致边部流和中部流的流体特性差异大且死区比例高。改进后的中间包的边部流和中部流间的流体特性趋于一致,最小停留时间仅相差1~2 s;实际平均停留时间平均增加145.9 s,死区比例平均减小17.2%。

关 键 词:中间包,水模型,控流装置,流体特性  

Characteristic of Fluid Flow in Four-Strand Tundish
LI Jing-min,LI Yi-hong,WANG Ping-an,WANG Min,ZHANG Li-qiang,BAO Yan-ping. Characteristic of Fluid Flow in Four-Strand Tundish[J]. CONTINUOUS CASTING, 2012, 31(1): 9-12
Authors:LI Jing-min  LI Yi-hong  WANG Ping-an  WANG Min  ZHANG Li-qiang  BAO Yan-ping
Affiliation:1. Special Steel Company of Fengbao, Anyang 456550, Henan, China 2. School of Metallurgical and Ecological, University of Science and Technology Beijing, Beijing 100083, China
Abstract:The fluid flow of four-strand tundish under various control devices was studied by water model experiments.The results show that high rate of flow fluid makes a large difference between the edge outlet and the middle outlet,and has high dead volume fraction.The improved tundish makes the characteristic of flow of fluid convergent,the gap of residence time between different outlets is reduced to 1 or 2 seconds,the residence time is increased by an average 145.9 s,and the dead volume fraction is decreased by an average 17.2%.
Keywords:tundish  water model  control devices  characteristic of fluid
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《连铸》浏览原始摘要信息
点击此处可从《连铸》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号