| 镍含量对2205双相不锈钢焊接接头的影响 |
| |
| 引用本文： | 王化明,陈兴润,潘吉祥,王常波,刘森,马敏敏.镍含量对2205双相不锈钢焊接接头的影响[J].中国冶金,2021,31(2):38-43. |
| |
| 作者姓名： | 王化明 陈兴润 潘吉祥 王常波 刘森 马敏敏 |
| |
| 作者单位： | 1.酒钢集团宏兴钢铁股份有限公司, 甘肃 嘉峪关 735100;
2.酒钢集团技术中心, 甘肃 嘉峪关 735100 |
| |
| 摘 要： | 采用光学显微镜观察了不同镍含量下2205双相不锈钢焊接接头的金相组织,通过点腐蚀试验测量腐蚀速率,并采用电化学工作站对焊接接头的点蚀电位进行测量.结果表明,1.2 m m厚度规格2205双相不锈钢焊接接头为铁素体加奥氏体的两相组织,点蚀坑主要出现在热影响区和焊缝.镍含量高的样品金相组织中奥氏体含量高,对应点蚀电位也要高...
|
| 关 键 词： | 2205双相不锈钢 焊接接头 显微组织 点蚀 镍含量 |
Effect of nickel content on 2205 duplex stainless steel welds |
| |
| WANG Hua-ming,CHEN Xing-run,PAN Ji-xiang,WANG Chang-bo,LIU Sen,MA Min-min.Effect of nickel content on 2205 duplex stainless steel welds[J].China Metallurgy,2021,31(2):38-43. |
| |
| Authors: | WANG Hua-ming CHEN Xing-run PAN Ji-xiang WANG Chang-bo LIU Sen MA Min-min |
| |
| Affiliation: | 1. Hongxing Iron and Steel Co., Ltd., Jiuquan Iron and Steel Group Corporation, Jiayuguan 735100, Gansu, China; 2. Technology Center, Jiuquan Iron and Steel Group Corporation, Jiayuguan 735100, Gansu, China |
| |
| Abstract: | The microstructures of the welded joint of 2205 duplex stainless steel with different nickel content were studied by optical microscope. The corrosion rate was measured by the pitting corrosion test. The pitting potential of the welded joint was measured by the electrochemical workstation. The results showed that the microstructures of the welded joint of 2205 duplex stainless steel with a thickness of 1.2 mm were two-phase microstructure (ferrite+austenite), and pitting pits mainly occurred in heat affected zone and weld metal. The higher the nickel content, the higher the austenite content, and the higher the pitting potential. The difference in pitting corrosion resistance was related to the phase ratio in the joint. |
| |
| Keywords: | 2205 duplex stainless steel welded joint microstructure pitting corrosion nickel content |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
|
