| H型钢轧制过程三维弹塑性大变形有限元模拟 |
| |
| 引用本文： | 卜勇力,刘才,赵文才,崔振山,程存江.H型钢轧制过程三维弹塑性大变形有限元模拟[J].钢铁研究学报,1999,11(4):22-25. |
| |
| 作者姓名： | 卜勇力 刘才 赵文才 崔振山 程存江 |
| |
| 作者单位： | 燕山大学轧机研究所,秦皇岛,066004 |
| |
| 基金项目： | “九五”国家计委科技攻关项目 |
| |
| 摘 要： | 针对轧制Ｈ型钢过程中易出现产品缺陷等问题，应用有限元软件（ＭＡＲＣ）的二次开发技术建立了Ｈ型钢的轧制模型，模拟了轧制过程。给出了Ｈ型钢的腹板、翼缘及其交界区３点在轧制过程中的应力及金属流动变化情况。结果表明，轧件出口后轧制断面上轧制方向的残余应力是造成Ｈ型钢腹板屈曲及其他缺陷的主要原因
|
| 关 键 词： | H型钢 轧制 弹塑性有限元 应力 |
| 修稿时间： | 1998-06-22 |
Simulation of Rolling for H Beam by 3-Dimension Elastic-Plastic Finite Element |
| |
| Bu Yongli,Liu Cai,Zhao Wencai,Cui Zhenshan,Cheng Cunjiang.Simulation of Rolling for H Beam by 3-Dimension Elastic-Plastic Finite Element[J].Journal of Iron and Steel Research,1999,11(4):22-25. |
| |
| Authors: | Bu Yongli Liu Cai Zhao Wencai Cui Zhenshan Cheng Cunjiang |
| |
| Abstract: | Rolling model of H beam was
established through developing MARC. The rolling process was simulated to solve the defect
problem for H beam. The stresses and metal flows in rolling process at three points, the
web center, flange center and their intersection of H beam were given. The result shows
that after exiting bite point, H beam has a longitudinal stress which makes web curve and
other problems. |
| |
| Keywords: | H beam rolling elastic-plastic finite element stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
