| 一种安全自动化弹体钻驻螺钉孔机的设计方法 |
| |
| 引用本文： | 何毅,高君,杨浩,刘丽红,贺飞.一种安全自动化弹体钻驻螺钉孔机的设计方法[J].新技术新工艺,2013(4):24-26. |
| |
| 作者姓名： | 何毅 高君 杨浩 刘丽红 贺飞 |
| |
| 作者单位： | 1. 中国兵器工业集团第五五研究所装药工程技术研究室,吉林长春,130012
2. 吉林省科学技术信息研究所,吉林长春,130021 |
| |
| 摘 要： | 对于某些品种弹体，在装配螺纹保护套的工艺过程中，需要预先钻出一个钻驻螺钉孔，用来安装钻驻螺钉连接保护套。传统工艺采用人工操作钻床设备进行钻孔，既保证不了钻孔深度、精度等工艺参数的要求，又导致生产效率低下，并且生产安全性没有任何保证。本文介绍了一种安全自动化弹体钻驻螺钉孔机的设计方法，阐述了机器的机械设计原理、自动化控制系统设计及安全化措施。
|
| 关 键 词： | 本质安全 钻驻螺钉孔机 自动化 |
Design Method of Safety Automatic Projectile Body Drill in the Screw Hole Machine |
| |
| HE Yi
,
GAO Jun
,
YANG Hao
,
LIU Lihong
,
HE Fei.Design Method of Safety Automatic Projectile Body Drill in the Screw Hole Machine[J].New Technology & New Process,2013(4):24-26. |
| |
| Authors: | HE Yi GAO Jun YANG Hao LIU Lihong HE Fei |
| |
| Affiliation: | 1. Exposives Charge Research Office, Changehun Equipment ＆ Technology Research Institute, Changehun 130012, China ; 2. Technological Information Research Institute of Jilin Province,Changchun 130021 ,China) |
| |
| Abstract: | Some kinds of projectile body need preliminarily drill a screw hole in assembling screw protecting jacket process to install drilling screw protecting jacket. Traditional process takes manual work to drill, which can not only unsure process parameters like drilling depth, precision and so on, but also lead to low productivity, and low product safety. The paper introduced a design method of safety automatic projectile body drill in the screw hole machine, presented the design principle, automatic control system design and securing measure. |
| |
| Keywords: | intrinsic safety drill in the screw hole machine automation |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
