The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating |
| |
Authors: | A Manap A Nakano K Ogawa |
| |
Affiliation: | 1. Fracture and Reliability Research Institute, Graduate School of Engineering, Tohoku University, 6-6-1, Aoba, Aramaki-aza, Aoba-ku, Sendai, Miyagi, 980-8579, Japan
|
| |
Abstract: | This paper presents the results of an oxidation behavior study for a thermal barrier coating (TBC) with air plasma sprayed yttria-stabilized zirconia top coat and CoNiCrAlY bond coat deposited using low pressure plasma spray (LPPS) and cold spray (CS). The TBC is subjected to isothermal oxidation and creep tests at 900?°C and evaluated using scanning electron microscopy, energy dispersive x-ray spectrometry transmission electron microscopy and electron backscatter diffraction. The thermally grown oxide (TGO) developed in the TBC with the LPPS bond coat was composed of only ??-Al2O3 and the TGO developed in the TBC with a CS bond coat is composed of ??-Al2O3 and ??-Al2O3. Despite the presence of this metastable ?? phase, the TGO in the CS specimens exhibits a dense microstructure and lower amounts of mixed oxides. The correlation between ??-Al2O3 and the formation of mixed oxides was investigated through the measurement of ??-Al2O3 thickness ratio and mixed oxides coverage ratio. It was found that the mixed oxides coverage ratio is inversely proportional to the ??-Al2O3 thickness ratio. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|