| 塑性管材测压试验排气式管端堵头的设计 |
| |
| 引用本文： | 梁燕飞. 塑性管材测压试验排气式管端堵头的设计[J]. 润滑与密封, 2003, 0(4): 79-79,81 |
| |
| 作者姓名： | 梁燕飞 |
| |
| 作者单位： | 佛山科学技术学院,广东,佛山,528000 |
| |
| 摘 要： | 介绍了一种用于塑性管材在进行测压试验时的排气式管端堵头的设计方法。这种堵头的特点是先排气后密封。在设计中运用了快换接头，整个堵头具有使用方便、排气彻底、密封牢固的效果。
|
| 关 键 词： | 塑性管材 测压试验 排气式管端堵头 设计 密封 |
The Design of the Exhaust Pipe-end Joint Used in Pressure Test of Plastic Pipe |
| |
| Liang Yanfei. The Design of the Exhaust Pipe-end Joint Used in Pressure Test of Plastic Pipe[J]. Lubrication Engineering, 2003, 0(4): 79-79,81 |
| |
| Authors: | Liang Yanfei |
| |
| Abstract: | This article introduces a design method of the exhaust pipe-end joint used in pressure test of plastic pipe. The quick-exchanged method has been used. The whole design has the effect of easy-use, thorough-exhaust, tight-seal, etc. |
| |
| Keywords: | Pipe-end Joint Exhaust Pressure Test Plastic Pipe |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
