| 面向装配的回转体零件砂型低压铸造模具和工装的并行设计 |
| |
| 引用本文： | 颜建军,林汉同,陈立亮,刘瑞祥,廖敦明,周建新.面向装配的回转体零件砂型低压铸造模具和工装的并行设计[J].铸造,2002,51(8):481-483. |
| |
| 作者姓名： | 颜建军 林汉同 陈立亮 刘瑞祥 廖敦明 周建新 |
| |
| 作者单位： | 华中科技大学材料学院,湖北武汉,430074 |
| |
| 基金项目： | 国家自然科学基金资助项目(编号:10176009). |
| |
| 摘 要： | 阐述了面向装配的并行设计思想及其在基于UG平台的低压铸造铸模工装CAD系统的实现方法 ,并对变形设计和相关性设计方法进行了研究。应用本系统 ,易于保证工装各部分的关联性 ,有效地防止了装配中可能出现的冲突问题 ,提高了设计效率。
|
| 关 键 词： | 低压铸造 模样 工艺装备 面向装配设计 并行设计 UG 变形设计 装配模型 |
| 文章编号： | 1001-4977(2002)08-0481-03 |
| 修稿时间： | 2001年11月28 |
Concurrent Design Faced Assembling for Technological Equipment of Low Pressure Casting |
| |
| YAN Jian-jun,LIN Han-tong,CHEN Li-liang,LIU Rui-xiang,LIAO Dun-ming,ZHOU Jian-xin.Concurrent Design Faced Assembling for Technological Equipment of Low Pressure Casting[J].Foundry,2002,51(8):481-483. |
| |
| Authors: | YAN Jian-jun LIN Han-tong CHEN Li-liang LIU Rui-xiang LIAO Dun-ming ZHOU Jian-xin |
| |
| Abstract: | The concurrent design faced assembling for technological equipment of the low pressure casting is discussed, the methods based on UG to achieve this purpose in CAD system have been presented, the methods for shape-variable design and interrelating design are studied in this paper. A system has been developed to ensure the interrelation of the technological equipment. It can effectively avoid conflicts occurring in assembling process and greatly improve design efficiency. |
| |
| Keywords: | low pressure casting pattern technological equipment design faced assembling concurrent design UG shape-variable design assembling model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
