| 车辆转向架橡胶圈模压成型工艺与压缩模设计 |
| |
| 引用本文： | 刘兆栋,黄晓红,孙玮光. 车辆转向架橡胶圈模压成型工艺与压缩模设计[J]. 模具工业, 2014, 0(1): 69-71 |
| |
| 作者姓名： | 刘兆栋 黄晓红 孙玮光 |
| |
| 作者单位： | 青岛四方车辆研究所有限公司,山东青岛266114 |
| |
| 摘 要： | 对车辆转向架用橡胶圈的结构特点和成型工艺进行了分析,介绍了利用压缩模成型橡胶圈的模具结构与模具工作过程,实践证明:该模具结构设计合理,操作简单、零件脱模方便。对于同类结构橡胶零件的模具设计和硫化工艺具有参考价值。
|
| 关 键 词： | 轨道车辆 橡胶圈 模压成型 压缩模 |
Compression moulding process and design of compression mould for vehicle bogie rubber ring |
| |
| LIU Zhao-dong,HUANG Xiao-hong,SUN Wei-guang. Compression moulding process and design of compression mould for vehicle bogie rubber ring[J]. Die & Mould Industry, 2014, 0(1): 69-71 |
| |
| Authors: | LIU Zhao-dong HUANG Xiao-hong SUN Wei-guang |
| |
| Affiliation: | (Qingdao Sifang Rolling Stock Research Institute Co., Ltd., Qingdao, Shandong 266114, China) |
| |
| Abstract: | The structural characteristics and forming process of the rubber ring of a vehicle bogie were analyzed. The mould structure and working process of a compression mould for the rubber ring were presented. |
| |
| Keywords: | rail vehicle rubber ring compression moulding compression mould |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
