| 用用户宏程序实现编程零点变换和成组加工 |
| |
| 引用本文： | 程建明,王海丽,邵华. 用用户宏程序实现编程零点变换和成组加工[J]. 机械设计与研究, 2002, 18(5): 65-67 |
| |
| 作者姓名： | 程建明 王海丽 邵华 |
| |
| 作者单位： | 上海交通大学,机械工程学院,上海,200030 |
| |
| 摘 要： | 本文利用FANUC及SIEMENS数控系统的宏指令功能 ,设计了编程零点变换宏程序和零件成组加工宏程序。使用宏程序 ,不仅使主程序长度大大缩短 ,又使可读性增强 ,现场修改方便 ,具有很好的技术经济效果
|
| 关 键 词： | 加工中心 宏程序 数控编程 成组加工 编程零点 |
| 文章编号： | 1006-2343(2002)05-0065-03 |
| 修稿时间： | 2001-12-10 |
Programming Zero Transforming and Group Machining of Workpiece by user Macroprograms |
| |
| CHENG Jian ming,WANG Hai li,SHAO Hua. Programming Zero Transforming and Group Machining of Workpiece by user Macroprograms[J]. Machine Design and Research, 2002, 18(5): 65-67 |
| |
| Authors: | CHENG Jian ming WANG Hai li SHAO Hua |
| |
| Abstract: | In this paper macroinstructions of FANUC and SIEMENS NC systems are employed to design macroprograms of programming zero transforming and group machining of workpiece.Main program can be shortened,easier to be read and modified by using the macroinstructions,good technical and economic performance are achieved as well. |
| |
| Keywords: | machining center macroprogram NC programming group machining programming zero |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
