| 采用上下位机的旋压机控制系统研究 |
| |
| 引用本文： | 杨旭东,张飞库,谢昆,王洪生,苏媛媛.采用上下位机的旋压机控制系统研究[J].现代制造工程,2010(4). |
| |
| 作者姓名： | 杨旭东 张飞库 谢昆 王洪生 苏媛媛 |
| |
| 作者单位： | 西北工业大学机电学院,西安,710072 |
| |
| 摘 要： | 根据旋压机的控制需求,对C630车床进行数字化改造。采用以工业控制计算机为上位机和可编程控制器(PLC)为下位机构成的两极控制模式,建立基于上、下位机的旋压机控制系统,使其成为数控旋压机。介绍旋压机控制系统的工作原理、硬件配置以及软件设计。
|
| 关 键 词： | 旋压机 上位机 下位机 可编程控制器 数控系统 |
Research of CNC system of spinning machine based on main-subordinate unit |
| |
| YANG Xu-dong,ZHANG Fei-ku,XIE Kun,WANG Hong-sheng,SU Yuan-yuan.Research of CNC system of spinning machine based on main-subordinate unit[J].Modern Manufacturing Engineering,2010(4). |
| |
| Authors: | YANG Xu-dong ZHANG Fei-ku XIE Kun WANG Hong-sheng SU Yuan-yuan |
| |
| Affiliation: | YANG Xu-dong,ZHANG Fei-ku,XIE Kun,WANG Hong-sheng,SU Yuan-yuan (School of Mechatronics,Northwestern Polytechnical University,Xi\'an 710072,China) |
| |
| Abstract: | A computer numerical control system of spinning machine was constituted,which was based on C630 lathe for the control necessities of spinning machine.This system was used a two-level control module in which the industrial control computer is used as main computer and PLC as subordinate computer.The principle,the hardware disposition,and the software design of the CNC system are also introduced in detail. |
| |
| Keywords: | spinning machine main computer subordinate computer PLC NC system |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
