| 表面修饰剂对制备超细聚磷酸铵的影响 |
| |
| 引用本文： | 徐艺青,殷恒波,卢燕,赵斌,蒋银花.表面修饰剂对制备超细聚磷酸铵的影响[J].塑料工业,2006,34(1):53-54. |
| |
| 作者姓名： | 徐艺青 殷恒波 卢燕 赵斌 蒋银花 |
| |
| 作者单位： | 江苏大学化学化工学院,江苏,镇江,212013 |
| |
| 摘 要： | 以十六烷基三甲基溴化铵（CTAB）为修饰剂，采用球磨和超声波振荡对工业阻燃剂聚磷酸铵（APP）进行超细化处理，用X射线衍射仪、扫描电镜及红外光谱对处理后的产品进行了表征。结果表明，利用球磨法可制备颗粒直径为200nm APP的超细粉体，该粉体的分散性良好；经球磨处理的超细化APP并未改变化学性质。
|
| 关 键 词： | 聚磷酸铵 表面修饰剂 球磨 超声 |
| 文章编号： | 1005-5770(2006)01-0053-02 |
| 收稿时间： | 2005-10-19 |
| 修稿时间： | 2005年10月19 |
Effect of Surface Finishing Compound on Preparation of Extra-fine Ammonium Polyphosphate |
| |
| XU Yi-qing,YIN Heng-bo,LU Yan,ZHAO Bin,JIANG Yin-hua.Effect of Surface Finishing Compound on Preparation of Extra-fine Ammonium Polyphosphate[J].China Plastics Industry,2006,34(1):53-54. |
| |
| Authors: | XU Yi-qing YIN Heng-bo LU Yan ZHAO Bin JIANG Yin-hua |
| |
| Affiliation: | Faculty of Chemistry and Chemical Eng, Jiangsu University, Zhenjiang 212013, China |
| |
| Abstract: | Ammonium polyphosphate (APP) was extra-fine treated by means of ball grinding and supersonic methods, with cetyltrimethylammonium bromide (CTAB) as finishing compound. The treated product was characterized by means of XRD, SEM, and FT-IR. The results showed extra-fine APP with an average particle diameter of 200 nm was successfully prepared by ball grinding method, the prepared powder had good dispersibility, and the chemical structure of the treated APP had no change. |
| |
| Keywords: | Ammonium Polyphosphate Surface Modifier Ball Grinding Supersonic |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
