首页 | 本学科首页   官方微博 | 高级检索  
     

巨型模锻水压机主工作缸的可靠性分析
引用本文:刘忠伟,刘少军,邓英剑,黄明辉,段志勇.巨型模锻水压机主工作缸的可靠性分析[J].锻压技术,2007,32(2):82-86.
作者姓名:刘忠伟  刘少军  邓英剑  黄明辉  段志勇
作者单位:中南大学,机电学院,湖南,长沙,410083;湖南工业大学冶金校区,湖南,株洲,412000;中南大学,机电学院,湖南,长沙,410083
基金项目:国家重点基础研究发展计划(973计划)
摘    要:300MN模锻水压机是我国国防和基础建设的关键设备,其中的主工作缸是水压机的重要部件之一,其工作性能的好坏将直接决定水压机能否正常进行工作.借助于故障树方法分析了主工作缸的失效模式,建立了主工作缸的可靠性框图.利用大型有限元软件(MARC)分析了主工作缸的应力,并根据应力-强度干涉模型估计了主工作缸结构的可靠度.分析结果表明,本工作缸可靠度为1,且具有较大余度,同时,其可靠度与液压系统有很大的关系.这为主工作缸的设计提供了参考依据.

关 键 词:水压机  可靠性  故障树  液压缸
文章编号:1000-3940(2007)02-0082-05
修稿时间:2006-10-182006-12-07

Reliability analysis of primary cylinder of giant forging hydraulic press
LIU Zhong-wei,LIU Shao-jun,DENG Ying-jian,HUANG Ming-hui,DUAN Zhi-yong.Reliability analysis of primary cylinder of giant forging hydraulic press[J].Forging & Stamping Technology,2007,32(2):82-86.
Authors:LIU Zhong-wei  LIU Shao-jun  DENG Ying-jian  HUANG Ming-hui  DUAN Zhi-yong
Affiliation:1. School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; 2. Hunan Industry University, Zhuzhou 412000, China
Abstract:300MN forging hydraulic press is the essential equipment of the national defense and the basic construction of our country.The primary work cylinder is one of the important parts in hydraulic press.Its performance is directly related to the well functioning of hydraulic press.With the aid of fault tree,the failure forms were analyzed,and the reliability block diagram of the primary working cylinder was set up.The stress of the primary cylinder was analyzed by the finite element software(MARC),and the reliability of the cylinder structure was predicted based on the stress-strength model.The results show that the reliability degree of the primary cylinder is 1 and there is a great margin.Its reliability is greatly related to the hydraulic system.It provides the reference to the design.
Keywords:hydraulic press  reliability  fault tree  hydraulic cylinder
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号